Best Machinery Stocks To Own Right Now

There's never a shortage of losers in the stock market. Let's take a closer look at five of this past week's biggest sinkers.

Company

April 12

Weekly Loss

NovaGold Resources (NYSEMKT: NG  )

$2.62

22%

McEwen Mining (NYSE: MUX  )

$2.24

18%

Titan Machinery (NASDAQ: TITN  )

$21.89

16%

Fortinet (NASDAQ: FTNT  )

$18.77

15%

Questcor Pharmaceuticals (NASDAQ: QCOR  )

Top 5 Shipping Companies To Invest In 2015: Deutz AG (DEZ)

DEUTZ AG is a Germany-based manufacturer of diesel engines. The Company produces engines with outputs of between 19 kilowatts (kW) and 520 kW for on-road as well as non-road applications. Its activities cover development, design, production, sales and services for diesel engines that are cooled by water, oil or air. DEUTZ AG divides its activities into two segments: DEUTZ Compact Engines and DEUTZ Customized Solutions. DEUTZ Customized Solutions segment focuses on air-cooled engines and large liquid-cooled engines with capacities of more than eight liters. The segment DEUTZ Compact Engines comprises liquid-cooled engines with capacities of less than four liters as well as engines with capacities of four to eight liters. The Company is the executive and operating company within the DEUTZ Group. It has a global reach with its production sites, ten distribution companies, nine sales offices, as well as over 800 distribution and service partners in more than 130 countries worldwide. Advisors' Opinion:

• [By Jonathan Morgan]

  RWE AG (RWE) jumped 6.4 percent, leading a gauge of utilities higher. Deutz AG (DEZ) plunged the most in more than two years after an investor sold a 8.4 percent stake in the manufacturer of diesel engines. ProSiebenSat.1 Media AG (PSM) dropped 1.1 percent after Telegraaf Media Groep NV sold its stake in the company.

Best Machinery Stocks To Own Right Now: Mueller Water Products Inc (MWA)

Mueller Water Products, Inc., incorporated on September 22, 2005, is a manufacturer and marketer of products and services used in the transmission, distribution and measurement of water. The Company�� product portfolio includes engineered valves, fire hydrants, pipe fittings, water meters, leak detection and pipe condition assessment which are used by municipalities, as well as the residential and non-residential construction industries. The Company operates in two segments: Mueller Co. and Anvil. Mueller Co. The Company�� valve or fire hydrant products are specified for use in the 100 metropolitan areas in the United States.

Mueller Co.

Mueller Co. manufactures valves for water and gas systems, including iron gate, butterfly, tapping, check, plug and ball valves, as well as dry-barrel and wet-barrel fire hydrants and a of pipe repair products, such as clamps and couplings used to repair leaks. The Company offers residential and commercial metering products and systems and leak detection and pipe condition assessment products and services. Mueller Co. products are sold through waterworks distributors.

The Company�� fire hydrants consist of an upper barrel and nozzle section and a lower barrel and valve section that connects to a water main. In dry-barrel hydrants, the valve connecting the barrel of the hydrant to the water main is located below ground at or below the frost line, which keeps the hydrant upper barrel dry. It sells dry-barrel fire hydrants with the Mueller and U.S. Pipe Valve and Hydrant brand names in the United States and the Mueller and Canada Valve brand names in Canada. The Company also makes wet-barrel hydrants, where the valves are located in the hydrant nozzles and the barrel contains water at all times. It also makes wet-barrel hydrants, where the valves are located in the hydrant nozzles and the barrel contains water at all times.

Mueller Co. manufactures a variety of intelligent water technology products under the Mue! ller Systems and Hersey Meters brand names that are designed to help water providers accurately measure water usage. These products include water meters, advanced metering infrastructure systems and automated meter reading products, have the capability to measure water usage ranging from small residential flows to large commercial and industrial applications.

Mueller Co. offers leak detection and pipe condition assessment products and services under the Echologics brand name. Other products include pipe repair products, such as clamps and couplings used to repair leaks and municipal castings, such as manhole covers and street drain grates. It sells these products under the Mueller and Jones brand names.

The Company competes with McWane, Inc., American Cast Iron Pipe Company, The Ford Meter Box Company, Inc., A.Y. McDonald Mfg, Sensus, Neptune Technology Group, Inc., Badger Meter, Inc., Aclara LLC and Itron, Inc.

Anvil

Anvil manufactures and sources a range of products, includes fittings, couplings, hangers, valves and related products for use in many non-residential constructions for HVAC, fire protection, energy and oil and gas applications. Anvil's products are sold through distributors who then sell the products to a variety of end users. These distributors are serviced primarily through Anvil's distribution centers.

Fittings and Couplings manufactures threaded and grooved pipe fittings and couplings. Pipe fittings and couplings join two pieces of pipe together. The five categories of pipe fittings and couplings are cast iron fittings, malleable iron fittings and unions, grooved fittings, couplings and valves, threaded steel pipe coupling and nipples. Hangers, manufacture an array of pipe hangers and supports. Standard pipe hangers and supports are used in fire protection sprinkler systems and HVAC applications where the objective is to provide rigid support from the building structure.

The Company competes with Ward Man! ufacturin! g L.L.C., malleable iron fittings, Victaulic Company, Tyco International Ltd., ERICO International Corporation, Cooper Industries plc and Carpenter & Paterson, Inc.

Advisors' Opinion:

• [By Travis Hoium]

  What: Shares of Mueller Water Products (NYSE: MWA  ) jumped as much as 17% today after the company released earnings.

  So what: Fiscal-second-quarter revenue jumped 12.6% to $283.1 million and net income was $6.2 million, or $0.05 per share. Analysts only expected revenue to be $270.8 million and earnings of $0.02 per share so this was well ahead of estimates. �

Best Machinery Stocks To Own Right Now: IDEX Corp (IEX)

IDEX Corporation (IDEX), incorporated on September 24, 1987, is an applied solutions business that sells an array of pumps, flow meters and other fluidics systems and components and engineered products to customers in a variety of markets worldwide. All of the Company�� business activities are carried out through wholly owned subsidiaries. IDEX operates in three business segments: Fluid & Metering Technologies, Health & Science Technologies and Fire & Safety/Diversified Products. Reporting units in the Fluid & Metering Technologies segment consist of Banjo; Energy and Fuels (Energy); Chemical, Food & Process (CFP) and Water & Waste Water (Water). Reporting units in the Health & Science Technologies segment consist of IDEX Health & Science (IH&S); IDEX Optics and Photonics (IOP); Precision Polymer Engineering (PPE); Gast; Micropump and Materials Process Technologies (MPT). Reporting units in the Fire & Safety/Diversified Products segment consist of Fire Suppression; Rescue Tools and Band-It. In July 20, 2012, it acquired Matcon Group Limited. In March 2013, it announced the acquisition of FTL Seals Technology, Ltd. On April 11, 2012, the Company acquired the stock of PPC. On April 30, 2012, the Company acquired the stock of ERC.

Fluid & Metering Technologies Segment

The Fluid & Metering Technologies Segment designs, produces and distributes displacement pumps, flow meters, injectors, and other fluid-handling pump modules and systems and provides flow monitoring and other services for the water and wastewater industries. Fluid & Metering Technologies pump and metering solutions serve a range of end markets, including industrial infrastructure (fossil fuels, refined and alternative fuels, and water and wastewater), chemical processing, agricultural, food and beverage, pulp and paper, transportation, plastics and resins, electronics and electrical, construction and mining, pharmaceutical and bio-pharmaceutical, machinery and other markets. Fluid & Metering Technologies accounte! d for 43% of IDEX�� sales and 82% of IDEX�� operating income, with approximately 46% of its sales to customers outside the United States as of December 31, 2012, with approximately 46% of its sales to customers outside the United States. Banjo is a provider of pumps, valves, fittings and systems used in liquid handling. Banjo is based in Crawfordsville, Indiana and its products are used in agricultural and industrial applications. Approximately 11% of Banjo�� sales during 2012 were to customers outside the United States.

Energy consists of the Company�� Corken, Faure Herman, Liquid Controls, S.A.M.P.I. and Toptech businesses. Energy is a supplier of flow meters, electronic registration and control products, rotary vane and turbine pumps, reciprocating piston compressors, and terminal automation control systems. Energy has facilities in Longwood, Florida and Zwijndrech, Belgium (Toptech products), Oklahoma City, Oklahoma (Corken products), La Ferte Bernard, France (Faure Herman products), Vadodara, Gujarat, India (Liquid Controls products), and Altopascio, Italy (S.A.M.P.I. products). Applications for Liquid Controls and S.A.M.P.I. positive displacement flow meters, electronic, registration and control products include mobile and stationary metering installations for wholesale and retail distribution of petroleum and liquefied petroleum gas, aviation refueling, and industrial metering and dispensing of liquids and gases. Corken products consist of rotary vane pumps, single and multistage regenerative turbine pumps, and small horsepower reciprocating piston compressors. Toptech supplies terminal automation hardware and software to control and manage inventories, as well as transactional data and invoicing, to customers in the oil, gas and refined-fuels markets. Faure Herman is a supplier of ultrasonic and helical turbine flow meters used in the custody transfer and control of fluids and gases. Approximately 53% of Energy�� sales during 2012 were to customers outside the United State! s.

!

CFP consists of the Company�� Richter, Viking and Warren Rupp businesses. CFP is a producer of air-operated and motor-driven double-diaphragm pumps and replacement parts, lined pumps, valves and control equipment for the chemical, fine chemical and pharmaceutical industries, and external gear pumps. Richter�� corrosion resistant fluoroplastic lined products offer solutions for applications in the process industry. Viking�� products consist of external gear pumps, strainers and reducers, and related controls used for transferring and metering thin and viscous liquids sold under the Viking and Wright Flow brands and air-operated double-diaphragm pumps sold under the Blagdon brand. Markets served by Viking products include chemical, petroleum, pulp and paper, plastics, paints, inks, tanker trucks, compressor, construction, food and beverage, personal care, pharmaceutical and biotech. Warren Rupp products (which also include Pumper Parts and Versa-Matic products) are used for abrasive and semisolid materials, as well as for applications where product degradation is a concern or where electricity is not available or should not be used. Markets served by Warren Rupp products include chemical, paint, food processing, electronics, construction, utilities, mining and industrial maintenance. CFP maintains operations in Kampen, Germany (Richter products), Cedar Falls, Iowa (Richter and Viking products), Eastbourne, East Sussex, England, Shannon, Ireland (Viking products) and Mansfield, Ohio (Warren Rupp products). CFP primarily uses independent distributors to market and sell its products. Approximately 54% of CFP�� sales during 2012 were to customers outside the United States.

Water consists of the Company�� ADS, IETG, iPEK, Knight and Pulsafeeder businesses. Water is a provider of metering technology and flow monitoring products and underground surveillance services for water and wastewater markets, as well as a manufacturer of pumps and dispensing equipment for industrial laundries! , commerc! ial dishwashing and chemical metering, and a provider of metering pumps, special-purpose rotary pumps, peristaltic pumps, fully integrated pump and metering systems, custom chemical-feed systems, electronic controls and dispensing equipment. ADS�� products and services provide integrated solutions that enable industry, municipalities and government agencies to analyze and measure the capacity, quality and integrity of wastewater collection systems, including the maintenance and construction of such systems. IETG�� products and services enable water companies to manage their water distribution and sewerage networks, while its surveillance service specializes in underground asset detection and mapping for utilities and other private companies. iPEK supplies remote controlled systems used for infrastructure inspection. Knight is a manufacturer of pumps and dispensing equipment for industrial laundries, commercial dishwashing and chemical metering. Pulsafeeder products are used to introduce precise amounts of fluids into processes to manage water quality and chemical composition, as well as peristaltic pumps. Its markets include water and wastewater treatment, oil and gas, power generation, pulp and paper, chemical and hydrocarbon processing, and swimming pools. Water maintains operations in Huntsville, Alabama and various other locations in the United States, Sydney, New South Wales, Australia and Melbourne, Victoria, Australia (ADS products), Leeds, England (IETG products and services), Hirschegg, Austria, and Sulzberg, Germany (iPEK products), Lake Forest, California, Mississauga, Ontario, Canada, Eastbourne, East Sussex, England, Unanderra, Australia, and Ciudad Juarez, Chihuahua, Mexico (Knight products), Rochester, New York, Punta Gorda, Florida and Milan, Italy (Pulsafeeder products). Approximately 47% of Water�� sales during 2012 were to customers outside the United States.

Water Services & Technology (WST) consists of the Company�� ADS, IETG and iPEK businesses. WST is a provi! der of me! tering technology and flow monitoring products and underground surveillance services for wastewater markets. ADS�� products and services provide integrated solutions that enable industry, municipalities and government agencies to analyze and measure the capacity, quality and integrity of wastewater collection systems, including the maintenance and construction of such systems. IETG�� products and services enable water companies to manage their water distribution and sewerage networks, while its surveillance service specializes in underground asset detection and mapping for utilities and other private companies. iPEK supplies remote controlled systems used for infrastructure inspection. WST maintains operations in Huntsville, Alabama and various other locations in the United States and Australia (ADS products and services); Leeds, England (IETG products and services); and Hirschegg, Austria, and Sulzberg, Germany (iPEK products). Approximately 40% of WST�� 2012 sales were to customers outside the United States.

The Company competes with Pump Solutions Group, Dover Corporation, Milton Roy and Tuthill Corporation.

Health & Science Technologies Segment

The Health & Science Technologies Segment designs, produces and distributes a range of precision fluidics, rotary lobe pumps, centrifugal and positive displacement pumps, roll compaction and drying systems used in beverage, food processing, pharmaceutical and cosmetics, pneumatic components and sealing solutions, including pumping solutions required in analytical instrumentation, clinical diagnostics and drug discovery, molded and extruded, biocompatible medical devices and implantables, air compressors used in medical, dental and industrial applications, optical components and coatings for applications in the fields of scientific research, defense, aerospace, telecommunications and electronics manufacturing, laboratory and commercial equipment used in the production of micro and nano scale materials, precision pho! tonic sol! utions used in life sciences, research and defense markets, and precision gear and peristaltic pump technologies. The segment accounted for 35% of IDEX�� sales and 35% of operating income in 2012, with approximately 54% of its sales to customers outside the United States.

IH&S consists of Eastern Plastics, Rheodyne, Ismatec, Sapphire Engineering, Upchurch Scientific and ERC, which was acquired in April 2012. IH&S has facilities in Rohnert Park, California (Rheodyne products); Bristol, Connecticut (Eastern Plastics products); Wertheim-Mondfeld, Germany (Ismatec products); Middleboro, Massachusetts (Sapphire Engineering products); Oak Harbor, Washington (Ismatec and Upchurch Scientific products); and Kawaguchi, Japan (ERC products). Eastern Plastics products, which consist of high- precision integrated fluidics and associated engineered plastics solutions, are used in a set of end markets including medical diagnostics, analytical instrumentation, and laboratory automation. Rheodyne products consist of injectors, valves, fittings and accessories for the analytical instrumentation market. Rheodyne products are used by manufacturers of high pressure liquid chromatography equipment servicing the pharmaceutical, biotech, life science, food & beverage, and chemical markets. Ismatec products include peristaltic metering pumps, analytical process controllers, and sample preparation systems. Sapphire Engineering and Upchurch Scientific products consist of fluidic components and systems for the analytical, biotech and diagnostic instrumentation markets, such as fittings, precision-dispensing pumps and valves, tubing and integrated tubing assemblies, filter sensors and other micro-fluidic and nano-fluidic components, as well as advanced column hardware and accessories for the high performance liquid chromatography (HPLC) market. Sapphire Engineering and Upchurch Scientific products primarily serve the pharmaceutical, drug discovery, chemical, biochemical processing, genomics/proteomics research, envir! onmental ! labs, food/agriculture, medical lab, personal care, and plastics/polymer/rubber production markets. ERC manufactures gas liquid separations and detection solutions for the life science, analytical instrumentation and clinical chemistry markets. ERC�� products consist of in-line membrane vacuum degassing solutions, refractive index detectors and ozone generation systems. Approximately 52% of IH&S�� 2012 sales were to customers outside the United States.

IOP consists of CVI Melles Griot (CVI MG), Semrock and AT Films (the Precision Photonics portion of the AT Films business was acquired in April 2012). CVI MG is a into design and manufacture of precision photonic solutions used in the life sciences, research, semiconductor, security and defense markets. CVI MG�� products are focused on the generation, control and productive use of light for a variety of key science and industrial applications. Products consist of specialty lasers and light sources, electro-optical components, specialty shutters, opto-mechanical assemblies and components. In addition, CVI MG produces critical components for life science research, electronics manufacturing, military and other industrial applications including lenses, mirrors, filters and polarizers. These components are utilized in a number of applications such as spectroscopy, cytometry (cell counting), guidance systems for target designation, remote sensing, menology and optical lithography.

CVI MG is headquartered in Albuquerque, New Mexico, with additional manufacturing sites located in Carlsbad, California; Rochester, New York; Isle of Man, British Isles; Leicester, England; Kyongki-Do, Korea; Tokyo, Japan; Didam, The Netherlands; and Singapore. Semrock is a provider of optical filters for biotech and analytical instrumentation in the life sciences markets. Semrock�� optical filters are produced using state-of-the-art manufacturing processes which enable it to offer its customers improvements in instrument performance and reliability.! Semrock ! is located in Rochester, New York. AT Films specializes in optical components and coatings for applications in the fields of scientific research, defense, aerospace, telecommunications and electronics manufacturing. The Precision Photonics portion of its business specializes in optical components and coatings for applications in the fields of scientific research, aerospace, telecommunications and electronics manufacturing. AT Films is headquartered in Boulder, Colorado. Approximately 57% of IOP�� 2012 sales were to customers outside the United Sates.

Containment consists of Precision Polymer Engineering (PPE). PPE, which is located in Blackburn, England, is a provider of high performance seals and advanced sealing solutions for a diverse range of global industries and applications, including hazardous duty, analytical instrumentation, semiconductor/solar, process technologies, pharmaceutical, electronics, and food applications. Approximately 79% of PPE�� 2012 sales were to customers outside the United States.

Gast consists of the Company�� Gast and Jun-Air businesses. The Gast business is a manufacturer of air-moving products, including air motors, low-range and medium-range vacuum pumps, vacuum generators, regenerative blowers and fractional horsepower compressors. Gast products are used in a variety of long-life applications requiring a quiet, clean source of moderate vacuum or pressure. Gast products primarily serve the medical equipment, environmental equipment, computers and electronics, printing machinery, paint mixing machinery, packaging machinery, graphic arts, and industrial manufacturing markets. The Jun-Air business is a provider of low-decibel, ultra-quiet vacuum compressors suitable for medical, dental and laboratory applications. Based in Benton Harbor, Michigan, Gast also has a logistics and commercial center in Redditch, England. Approximately 27% of Gast�� 2012 sales were to customers outside the United States.

Micropump, headquartered i! n Vancouv! er, Washington, produces, precision-engineered, magnetically and electromagnetically driven rotary gear, piston and centrifugal pumps. Micropump products are used in low-flow abrasive and corrosive applications. Micropump products primarily serve the printing machinery, medical equipment, paints and inks, chemical processing, pharmaceutical, refining, laboratory, electronics, pulp and paper, water treatment, textiles, peristaltic metering pumps, analytical process controllers and sample preparation systems markets. Approximately 77% of Micropump�� 2012 sales were to customers outside the United States.

MPT consists of Quadro, Fitzpatrick, Microfluidics and Matcon Group Limited (Matcon), which was acquired in July 2012. Quadro is a provider of particle control solutions for the pharmaceutical and bio-pharmaceutical markets. Based in Waterloo, Ontario, Canada, Quadro�� activities include fine milling, emulsification and special handling of liquid and solid particulates for laboratory, pilot phase and production scale processing within the pharmaceutical and bio-pharmaceutical markets. Fitzpatrick is into the design and manufacture of process technologies for the pharmaceutical, food and personal care markets. Fitzpatrick designs and manufactures customized size reduction, roll compaction and drying systems to support their customers��product development and manufacturing processes. Fitzpatrick is headquartered in Elmhurst, Illinois. Microfluidics is into designing and manufacturing of laboratory and commercial equipment used in the production of micro and nano scale materials for the pharmaceutical and chemical markets. Microfluidics is the producer of the Microfluidizer family of high shear fluid processors for uniform particle size reduction, robust cell disruption and nanoparticle creation. Microfluidics has offices in Newton, Massachusetts. Matcon is into material processing solutions for high value powders used in the manufacture of pharmaceuticals, food, plastics, and fine chemic! als.

!

Matcon�� products consist of the original cone valve powder discharge system and filling, mixing and packaging systems, all of which support its customers��automation and process requirements. Matcon is located in Evesham, Worcestershire, England. Approximately 61% of MPT�� 2012 sales were to customers outside the United States.

The Company competes with Gardner Denver, Inc., Thermo Scientific Dionex, Gooch & Housego PLC, Parker Hannifin and Valco Instruments Co., Inc.

Fire & Safety/Diversified Products Segment

The Fire & Safety/Diversified Products segment produces firefighting pumps and controls, rescue tools, lifting bags and other components and systems for the fire and rescue industry, engineered stainless steel banding and clamping devices used in a variety of industrial and commercial applications, and precision equipment for dispensing, metering and mixing colorants and paints used in a variety of retail and commercial businesses around the world. The segment accounted for 22% of IDEX�� sales and 53% of IDEX�� operating income in 2012, with approximately 56% of its sales to customers outside the United States.

Fire Suppression consists of the Company�� Class I, Hale and Godiva businesses, which produce truck-mounted and portable fire pumps, stainless steel valves, foam and compressed air foam systems, pump modules and pump kits, electronic controls and information systems, conventional and networked electrical systems, and mechanical components for the fire, rescue and specialty vehicle markets. Fire Suppression�� customers are primarily OEMs. Fire Suppression is headquartered in Ocala, Florida (Class 1 and Hale products), with additional facilities located in Warwick, England (Godiva products). Approximately 41% of Fire Suppression�� 2012 sales were to customers outside the United States.

Rescue consists of the Company�� Dinglee, Hurst Jaws of Life, Lukas and Vetter businesses, which produce hydraulic! , battery! , gas and electric-operated rescue equipment, hydraulic re-railing equipment, hydraulic tools for industrial applications, recycling cutters, pneumatic lifting and sealing bags for vehicle and aircraft rescue, environmental protection and disaster control, and shoring equipment for vehicular or structural collapse. Rescue Tool�� customers are primarily public and private fire and rescue organizations. Rescue has facilities in Shelby, North Carolina (Hurst Jaws of Life products); Tianjin, China (Dinglee products); Erlangen, Germany (Lukas products); and Zulpich, Germany (Vetter products). Approximately 75% of Rescue�� 2012 sales were to customers outside the United States.

Band-It is a producer of stainless steel banding, buckles and clamping systems. Band-It products are used for securing exhaust system heat and sound shields, industrial hose fittings, traffic signs and signals, electrical cable shielding, identification and bundling, and in numerous other industrial and commercial applications. Band-It products primarily serve the automotive, transportation equipment, oil and gas, general industrial maintenance, electronics, electrical, communications, aerospace, utility, municipal and subsea marine markets. Band-It is based in Denver, Colorado, with additional operations in Staveley, Derbyshire, England, and a IDEX shared manufacturing facility in China. Approximately 39% of Band-It�� 2012 sales were to customers outside the United States.

Dispensing Equipment produces precision equipment for dispensing, metering and mixing colorants and paints used in a variety of retail and commercial businesses worldwide. Dispensing Equipment is a global supplier of precision-designed tinting, mixing, dispensing and measuring equipment for auto refinishing and architectural paints. Dispensing Equipment products are used in retail and commercial stores, hardware stores, home centers, department stores, automotive body shops as well as point-of-purchase dispensers. Dispensing Equipmen! t is head! quartered in Wheeling, Illinois with additional facilities in Sassenheim, The Netherlands; Unanderra, Australia; and Milan, Italy, as well as IDEX shared manufacturing facilities in India and China. Approximately 59% of Dispensing Equipment�� 2012 sales were to customers outside the United States.

The Company competes with American Cast Iron Pipe Company, Holmatro, Inc., Nordic Capital and Panduit Corporation.

Advisors' Opinion:

• [By Ben Levisohn]

  Xylem’s big day has also boosted other water-infrastructure stocks. Flowserve (FLS) has gained 1.2% to $70.59, Idex Corp. (IEX) has risen 0.5% to $68.69 and Thermo Fisher Scientific (TMO) has advanced 0.4% t0 $98.22.

Best Machinery Stocks To Own Right Now: Rofin-Sinar Technologies Inc (RSI)

Rofin-Sinar Technologies Inc., incorporated on July 19, 1996, is engaged in the designing, development, engineering, manufacturing and marketing of laser-based products used for cutting, welding and marking a range of materials. The Company offers a range of laser products and related services for three material processing applications: cutting, welding, and surface treatment (macro applications); marking, and fine cutting, fine welding, micro drilling, and micro structuring (micro applications). It provides a range of laser sources and laser-based system solutions to markets, such as the machine tool, automotive, semiconductor, electronics, and photovoltaic industries. Its product categories include Laser macro products, Laser marking products, Laser micro products and Components. The products are sold directly to end-users and to original equipment manufacturers (OEMs).

As of September 30, 2013, the Company had over 4,000 customers (including multinational companies with multiple facilities purchasing from the Company). During the year ended September 30, 2013 (fiscal 2013), approximately 38%, of the Company�� revenues related to sales of laser products for macro applications, approximately 13%, related to sales of components, and approximately 49%, related to sales of laser products for marking and micro applications.

LASER MACRO PRODUCTS

The Company�� carbon dioxide laser products for macro applications consist of DC Slab Series, SC Series, XL Series, STS Series, FH Series and SM Series. Its XL, STS, FH and SM Series fast-axial flow carbon dioxide lasers are used for both cutting and welding applications and are marketed under the PRC and NELC brand. XL, STS, FH, SM, FA, and PLS Series products are used primarily by the machine tool industry. Its SC Series diffusion cooled, wave-guide carbon dioxide lasers are developed and produced by Rofin-Sinar UK Ltd. The SC Series are sealed-off lasers, used for cutting and structuring applications. Markets for the! se include machine tool, electronics, and packaging industries. The Company�� DQ Series of Q switched, solid-state lasers are designed for applications, such as removal, cleaning and insulation of various materials in the automotive, consumer electronics and photovoltaic markets. The Company�� FL Series of high-brightness single or multi-mode fiber lasers use fiber optics as the active medium. These fiber lasers are used for cutting and welding applications, as well as for new applications, such as remote cutting. Its diode lasers are designed to meet the requirements of a range of welding, soldering and surface treatment applications.

LASER MARKING PRODUCTS

Rofin offers standardized and customized laser marking systems in different power ranges and wavelengths for use in various industrial segments. The Company�� standard PowerLine marking products consist of a range of lasers with output power from 2 watts to 100 watts with a galvo-head, a personal computer with processor, and Rofin�� VisualLaserMarker software. Special options and accessories include a double marking head allowing speeds of up to 1,600 characters per second in certain applications, as well as beam-switching and -splitting options for marking of products in multiple production lines using a single laser. It is used in the semiconductor and electronics industries. MultiScan vector scanning marker utilizes a 100 watts sealed-off carbon dioxide laser. It is used in marking of consumer goods in the packaging industry. LabelMarker Advanced is a laser-based system is Rofin�� solution. This laser system is used in any production area without additional safety requirements. The EasyMark is a transportable desktop device. The EasyMark offers a program-controlled z-axis and a rotary axis, which can optionally be integrated. An aluminum T-slot plate facilitates mounting of customer-specific work piece carriers. The EasyJewel is a transportable desktop device developed to mark jewellery. CombiLine Cube/CombiLi! ne Advanc! ed compact laser workstations have been designed for small and medium-size batches. NuQ pulsed fiber laser sources are produced and marketed under the Nufern brand and are designed for OEM customers and integrators.

LASER MICRO PRODUCTS

The Company markets and sells a range of laser products, including, pulsed, fiber and other solid-state lasers for various spot welding and fine cutting applications; carbon dioxide Slab lasers for perforating applications; Q switched, solid-state lasers for surface structuring, and diode lasers for soldering and plastic welding applications. The Company's manual welders for micro applications, which are sold under the name Performance Tool Open and Internal, consist of pulsed, solid-state lasers in the range of 60 watts to 200 watts, which are primarily used for fine welding applications in the medical device, jewelry and mold making industries. The StarPulse Series consists of pulsed Nd:YAG rod lasers with power ratings from 40 to 500 watts. These are designed for use in fine welding applications, such as laser welding of reflective materials in the medical device and electronics industry.

The StarFiber Series achieve nominal powers of 100 watts up to 600 watts. The lasers can be operated in either pulse-modulated or continuous wave mode. The StarFiber Series is designed for a range of applications for fine welding and fine cutting, such as welding of electromechanic components or fine cutting. The X-Lase Series consists of picosecond pulse mode-locked fiber laser systems with an output power of upto 24 watts. Markets are in the semiconductor, electronics and display industries. In these industries, the X-Lase products can be used for thin film patterning, ablation and scribing applications. Its StarFemto Series consists of femtosecond pulse mode-locked laser systems with a maximal output power of 5 watts. Main markets are medical implants and other fine cutting or structuring applications. The PerfoLas Systems consist of a carbo! n dioxide! laser in combination with a galvo scanning head and is used for precise cutting, drilling, and surface structuring.

The Universal Workstation (UW) and Modular Processing System (MPS) Series are modular laser-based systems that are designed to meet a variety of applications, including welding, cutting, surface modification and ablation. Depending on the application, the UW and MPS Systems can be equipped with different laser sources (femtosecond, fiber, diode, or solid-state laser) and modified for specific handlings. Series 800 are flash-lamp pumped, solid-state lasers sold to OEM customers, and system integrators for various micro and marking applications. Series LDP and LEP are diode pumped, solid-state lasers sold to OEM customers and system integrators for various micro and marking applications. Series LDPP are diode pulse-pumped Nd:YAG lasers that are designed to cut thin metals. Market is the medical devices industry. Series LFP are hybrid diode pumped, solid state, picosecond lasers that are produced and marketed under the Lee Laser brand and are sold to OEM customers and system integrators for various micro applications.

The COMPACT and MINI Diode Laser System Series are laser systems are available in a range of output powers and wavelengths, including fiber-coupled direct beam or line source solutions, and are engineered for utilization in industrial laser materials processing, mainly for plastic welding, soldering and brazing applications in the automotive, medical device and electronic industries. The KLS Series lasers are pulsed solid-state lasers which are used for fine cutting, drilling and scribing applications. The FLS Series are lamp pumped, pulsed, solid-state lasers with high peak power for deep penetration cutting, welding and drilling. SLS CL Series are pulsed Nd:YAG solid-state lasers with output powers in the range of 5 to 250 watts. The KLS 246, FLS, LFS and SLS CL Series are all manufactured by the Company's Switzerland-based subsidiary LASAG.

COMP! ONENT PRODUCTS

The Company offers power supplies for pulsed and continuous wave solid-state lasers, carbon dioxide lasers, diode lasers, as well as radio frequency (RF) generators for acousto-optic Q-switches through its wholly owned subsidiary PMB Elektronik GmbH. Fiber and Optics Technology are special fiber lasers, fiber coupling products and optical engines, for use in fiber lasers are manufactured and marketed by the Company�� Finland-based subsidiary Corelase Oy. Laser Diodes and Modules are high-power semiconductor components, such as high power, high-brightness laser diodes and modules are manufactured and marketed by the Company�� subsidiaries Dilas Diodenlaser GmbH, Dilas Diodelaser Inc., Dilas Diodelaser China and m2k-laser GmbH. Fibers, fiber components, beam splitters or switches and beam combiners designed for use in industrial lasers or as beam delivery systems are manufactured and marketed by Optoskand AB. Fibers and fiber laser technology components are developed, manufactured and marketed by Nufern, East Granby. The Company�� high-technology components are either integrated by other laser manufacturers into their products or are used for the Company�� own product portfolio.

The Company competes with Trumpf, GSI Group, Unitek Miyachi, Han's Laser, Fanuc, Synrad, Coherent, IPG, Laserline and Jenoptik.

Advisors' Opinion:

• [By Joon Choi]

  Currently, the monthly relative strength indicator (RSI) reading is 83.7. (A reading over 70 is considered to be overbought.) To put this figure in perspective, the monthly RSI of the Nasdaq Composite was 85.9 on March of 2000 (the index peak), and we know what happened afterwards.

• [By Greg Harmon]

  The Fresh Market (TFM), has been rising off of a bottom in March. It recently went through a 'W' consolidation and jumped higher, but is now retesting the top of the 'W'. The relative strength index (RSI) has held the mid line during the pullback and remains bullish while the moving average convergence divergence indicator (MACD) is not as positive. A turn higher, back over 53.50 could be a catalyst for a long entry, but a fall under 52 sets a target for a measured move (MM) lower to 50. This stock does not report earnings until late August.

Best Machinery Stocks To Own Right Now: Cleantech Transit Inc (CLNO)

Cleantech Transit, Inc., incorporated on June 28, 2006, is a development-stage company. The Company focuses to explore opportunities in the development and production of hybrid, electric, alternative fuel and diesel heavy duty transit buses, luxury motor coaches and tour buses. On July 11, 2011, the Company formed Cleantech Energy, Inc. as a wholly owned subsidiary. In February 2013, the Company announced that acquired from Crown Equity Holdings Inc., Crown Buy Rite.

On July 25, 2011, the Company formed Cleantech Exploration Corp. as a wholly owned subsidiary. On October 31, 2011, the Company acquired a 40% interest in Ortigalita Power Systems, LLC a waste power generating project in California.

Advisors' Opinion:

• [By CRWE]

  Cleantech Transit, Inc. (OTCMKTS:CLNO) (www.cleantechtransit.net) through its Discovery Carbon subsidiary, develops emissions offset strategies for companies, municipalities, and countries. CLNO currently (ref. google finance Delayed: 12:10PM EDT June 19, 2013)�surged�(+7.02%)�up�+0.0059 at $.0899.�This morning (June 19, 2013), this company�hit as low as $.073�and as high as $.09. The fact that their is under a million shares in play thus far only ignites the excitement that�CLNO brings to the table.

  Today�(June 19) CLNO�� daily range was at ($.09 – $.073) currently at $.0899 would be considered a (+8072.7%) gain above the 52 wk low of $.0011.�Eventhough CLNO has��surged�(+7.02%)�up�+0.0059 at $.0899 with 535,400 shares in play far (ref. google finance Delayed: 11:32AM EDT June 19, 2013), the stock is up +5893.33% since the concerning dates of December 20, 2013 ��June 19, 2013. +5893.33% is the 6 month high and rightly so.

  Earlier this month (June 3), CLNO acquired control of Discovery Carbon Environmental Securities Corporation (��iscovery��. The acquisition advances the strategy of developing significant market share in the alternative clean energy sector. Discovery�� proprietary GreenTrees��for renewable energy, and EvoCert��environmental credits for offsetting business and individual carbon foot prints are some of the exciting products Discovery provides to clients throughout the world.

  Breaking Shareholder News: (Jun 18, 2013)

  Cleantech Transit Inc. will change its name to EQCO2, Inc. The name change is more reflective of the Company�� proposed business operations.

  This change is being implemented after the company�� acquisition of Discovery Carbon which engages in the offsetting (equalizing/neutralizing) carbon dioxide (CO2) emissions through the development and use of renewable energy products and emission offset credits. As a result of the name change, the Company may be issued a ne

• [By CRWE]

  Cleantech Transit, Inc. (OTCMKTS:CLNO) (www.cleantechtransit.net ) through its Discovery Carbon subsidiary, develops emissions offset strategies for companies, municipalities, and countries. Last Friday, CLNO had shed (-4.47%) down -0.011 at $.235 with 579,706 shares in play for that closing day (ref. google finance July 5, 2013 ��Close). Earlier that same Friday morning (July 5), this company hit as low as $.225 and as high as $.259. The fact that their was under a million shares in play that day (July 5 ) and last Wednesday (July 3) with the addition of the last 3 weeks plus action (June 10 – July 2 ) their has been over a million shares in play only ignites the exciting potential growth this company might bring to the table along with active savvy investor interest.

  CLNO previously announced it plans to change its name to EQCO2, Inc. and also the plan for a 1 for 5 forward stock split for its common stock. Today (July 5) Cleantech announced that the process for both is underway and is expected to occur before the end of July.

  FYI ��(July 5) Cleantech Transit, Inc. Files SEC form 8-K http://www.otcmarkets.com/edgar/GetFilingHtml?FilingID=9389837

  FYI ��(July 3) Cleantech Transit, Inc. Files DEF 14C http://www.otcmarkets.com/edgar/GetFilingHtml?FilingID=9386382

• [By CRWE]

  Cleantech Transit, Inc. (OTCMKTS:CLNO) (www.cleantechtransit.net ) through its Discovery Carbon subsidiary, develops emissions offset strategies for companies, municipalities, and countries. Today, CLNO has�surged (+4.05%)�up + 0.007 at $.180 with 33,560 shares in play thus far (ref. google finance Delayed: 12:49PM EDT July 25, 2013).

  CLNO�� daily range is at ($.19 – $.17) thus far and currently at $.180 would be considered a (+16263.63%) gain above the 52 wk low of $.0011. The stock is up +0.18 ( +7400%) since the concerning dates of January 28, 2013 ��July 25, 2013. +7400% is the 6 month high and rightly so.

• [By CRWE]

  Cleantech Transit, Inc. (OTCMKTS:CLNO) (www.cleantechtransit.net) through its Discovery Carbon subsidiary, develops emissions offset strategies for companies, municipalities, and countries. CLNO currently has surged (+30.00%) up +0.030 at $.130 with 1,747,826 shares in play at the close (ref. google finance June 21, 2013 ��Close). Last Friday morning (June 21, 2013), this company hit as low as $.102 and as high as $.148. The fact that their is over a million shares in play all week only ignites the excitement that CLNO brings to the table.

  Last Friday (June 21) CLNO�� daily range was at ($.148 – $.102) currently at $.130 would be considered a (+11718.18%) gain above the 52 wk low of $.0011. Eventhough CLNO has surged (+30.00%) up +0.030 at $.130 with 1,747,826 shares in play at the close (ref. google finance June 21, 2013 ��Close), the stock is up +8566.67% since the concerning dates of December 24, 2013 ��June 21, 2013. +8566.67% is the 6 month high and rightly so.

  Earlier this month (June 3), CLNO acquired control of Discovery Carbon Environmental Securities Corporation (��iscovery��. The acquisition advances the strategy of developing significant market share in the alternative clean energy sector. Discovery�� proprietary GreenTrees��for renewable energy, and EvoCert��environmental credits for offsetting business and individual carbon foot prints are some of the exciting products Discovery provides to clients throughout the world.

  CLNO reported last Friday (June 21), that it has acquired 81% of the issued and outstanding shares of Discovery Carbon Environmental Securities Corporation (��iscovery��, a Nevada corporation. The acquisition advances the strategy of developing significant market share in the alternative clean energy sector. Discovery�� proprietary GreenTrees��for renewable energy, and EvoCert��environmental credits for offsetting business and individual carbon foot prints are some of the excitin